My contact person
ASI Automatikk AS

Distributor

Sankt Hallvards vei 3, port 8

3414 Lierstranda

NORWAY

+47 9006 1100
Cylindrical bushings with flange

Sleeve bearings made from high performance plastics provide mechanical stability with the lowest coefficients of friction without additional lubrication. Whether in dirt and dust, in the cleanroom laboratory or under water.
 

Filter

Core Requirements
Size
Requirements
Material

Due to order peaks, the delivery time is 5-8 working days longer than stated. Please refer to our order confirmation for the specific delivery date. For urgent, short-term requirements, please contact us personally so that we can realise the delivery time necessary for you. You will find your contact person at the top of the menu under "My contact person", next to the language/country selection, or on this page.

Number of products: 56

iglidur® G, sleeve bearing with flange, mm
  • The all-round classic with an excellent price/performance ratio
  • High wear resistance
  • Resistance to dust and dirt
  • Cost-effective
0.74 USD/Pc.
208 ready for shipping in 24 - 48 hours
74 ready for shipping in 3 - 4 working days
To the product page
iglidur® J, sleeve bearing with flange, mm
  • The versatile endurance runner, highly resistant to wear on (nearly) all shafts with very low coefficients of friction
  • Low wear against different shaft materials
  • Low coefficients of friction in dry operation
  • Vibration-dampening
1.12 USD/Pc.
117 ready for shipping in 24 - 48 hours
21 ready for shipping in 3 - 4 working days
To the product page
iglidur® A350, sleeve bearing with flange, mm
  • Completely lubrication-free belt guiding
  • Low drive power
  • The endurance runner at higher temperatures in the food sector
  • Tight deflection radii
  • Compliant with EU regulation 10/2011
  • Long service life of the belt
  • FDA-compliant
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • For use with temperatures up to +180 °C
2.84 USD/Pc.
40 ready for shipping in 24 - 48 hours
To the product page
iglidur® M250, sleeve bearing with flange, mm
  • Robust all-rounder material
  • Excellent vibration dampening
  • Resistant to edge pressure
  • High impact resistance
0.87 USD/Pc.
127 ready for shipping in 24 - 48 hours
13 ready for shipping in 3 - 4 working days
To the product page
iglidur® X, sleeve bearing with flange, mm
  • The chemical and temperature specialist, up to 150 MPa static
  • Temperature resistant from -100 °C to +250 °C in continuous operation
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Universal chemical resistance
  • High compressive strength
1.70 USD/Pc.
65 ready for shipping in 24 - 48 hours
10 ready for shipping in 3 - 4 working days
To the product page
iglidur® W300, sleeve bearing with flange, mm
  • The classic endurance runner, very wear resistant on (virtually) all shafts
  • For especially long service life
  • Low coefficient of friction
  • Extremely high wear resistance
1.40 USD/Pc.
100 ready for shipping in 24 - 48 hours
4 ready for shipping in 3 - 4 working days
To the product page
iglidur® GLW, sleeve bearing with flange, mm
  • Cost-effective material for mass production
  • Applications with static loads
  • Cost-effective
  • Dirt-resistant
  • Resistant to vibrations
  • Lubrication and maintenance-free
Upon request
4 ready for shipping in 3 - 4 working days
To the product page
iglidur® SG03, flanged sleeve bearing and felt seal, mm
  • Clean bearings even with dirt and dust, thanks to felt seal
  • In laboratory tests, a service life up to 50 times higher was achieved.
  • Most popular iglidur material worldwide
  • High wear resistance
Upon request
1 ready for shipping in 24 - 48 hours
To the product page
iglidur® J260, sleeve bearing with flange, mm
  • Ideal for plastic shafts
  • Very good c. o. f. for low or medium loads
  • Good liquid media resistance
  • Slightly higher temperature rating than iglidur® J
1.72 USD/Pc.
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® J3, sleeve bearing with flange, mm
  • The new endurance runner: specialist for pulsating loads
  • Low coefficients of friction
  • Good liquid media resistance
  • Low humidity absorption
1.39 USD/Pc.
42 ready for shipping in 24 - 48 hours
1 ready for shipping in 3 - 4 working days
To the product page
iglidur® J350, sleeve bearing with flange, mm
  • Endurance runner with high dimensional stability at high temperatures - Can be used with many kind of shafts and loads
  • Excellent coefficient of friction against steel
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Continuous service temperature up to +180 °C
  • For medium to high loads
1.92 USD/Pc.
42 ready for shipping in 24 - 48 hours
To the product page
iglidur® W360, sleeve bearing with flange, mm
  • General purpose endurance runner
  • Extremely wear-resistant
  • Continuous use up to +180°C
  • Suitable for wet environments
2.84 USD/Pc.
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® L250, sleeve bearing with flange, mm
  • For high speeds
  • Specially made for fast rotating applications
  • Very low coefficients of friction
  • Excellent wear resistance
4.31 USD/Pc.
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® R, sleeve bearing with flange, mm
  • Low-cost material, low wear
  • Good abrasion resistance
  • Low coefficients of friction in dry operation
  • Cost-effective
0.96 USD/Pc.
17 ready for shipping in 3 - 4 working days
To the product page
iglidur® D, sleeve bearing with flange, mm
  • Low-cost material with silicone
  • Low coefficients of friction at high speeds
  • For low loads
  • Cost-effective
iglidur® X6, sleeve bearing with flange, mm
Runs up to six times longer than iglidur® X
  • Long term service temperature up to +250 °C
  • Up to 50 % better press fit than iglidur® X
  • High compressive strength
3.71 USD/Pc.
14 ready for shipping in 3 - 4 working days
To the product page
iglidur® V400, sleeve bearing with flange, mm
  • For soft shafts, up to +200 °C
  • Excellent wear resistance with soft shaft materials and for temperatures up to +200 °C
  • Good resistance to chemicals
  • High elasticity
3.71 USD/Pc.
7 ready for shipping in 3 - 4 working days
To the product page
iglidur® Z, sleeve bearing with flange, mm
  • Extremely long service life under extreme conditions, resistant to wear and impact even at high loads and temperatures
  • Excellent wear resistance especially with high loads
  • High thermal resistance
  • For extreme loads
4.01 USD/Pc.
65 ready for shipping in 3 - 4 working days
To the product page
iglidur® P210, sleeve bearing with flange, mm
  • Specialist for pivoting, rolling applications and more - Good coefficients of friction and wear on almost every shaft
  • Low humidity absorption
  • Extremely wear resistant especially up to 20 MPa in pivoting applications
  • Versatile: performance on many different shafts
  • Good with edge loads
  • Lubrication and maintenance-free
  • Standard range from stock
1.09 USD/Pc.
41 ready for shipping in 24 - 48 hours
1 ready for shipping in 3 - 4 working days
To the product page
iglidur® UW500, sleeve bearing with flange, mm
  • For hot liquids and fast, continuous movements
  • For underwater use at high temperatures
  • For fast and constant movement
  • Lubrication and maintenance-free
iglidur® H, sleeve bearing with flange, mm
  • High resistance to temperature and chemicals
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Can be used underwater
  • For high temperatures
  • Chemical resistance
1.30 USD/Pc.
34 ready for shipping in 3 - 4 working days
To the product page
iglidur® H1, sleeve bearing with flange, mm
  • Endurance runner with high media resistance
  • High wear resistance in extreme ambient conditions
  • Very low coefficient of friction
  • High resistance to temperature and chemicals
1.72 USD/Pc.
46 ready for shipping in 24 - 48 hours
1 ready for shipping in 3 - 4 working days
To the product page
iglidur® H370, sleeve bearing with flange, mm
  • Extremely long service life under water and high media-resistance
  • Wear-resistant – especially under water
  • High temperature resistance –40 °C to +200 °C
  • High chemical resistance
2.03 USD/Pc.
54 ready for shipping in 24 - 48 hours
3 ready for shipping in 3 - 4 working days
To the product page
iglidur® C500, sleeve bearing with flange, mm
  • High resistance to media and temperature, up to 250 °C, wear-resistant
  • High resistance to media and temperature
  • Resistant to water vapour
  • Good coefficients of friction and wear
4.97 USD/Pc.
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® H2, sleeve bearing with flange, mm
  • Low-cost, for high temperatures
  • Can be used underwater
  • Resistant to chemicals
  • For high temperatures
iglidur® P, sleeve bearing with flange, mm
  • The cost-effective outdoor allrounder - No moisture expansion even with high ambient humidity
  • Low water absorption
  • Low wear rates
  • High load capacity
0.81 USD/Pc.
66 ready for shipping in 24 - 48 hours
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® A180, sleeve bearing with flange, mm
  • The FDA-compliant all-rounder
  • The iglidur® A180 material complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good liquid media resistance
  • For wet environments
0.72 USD/Pc.
9 ready for shipping in 24 - 48 hours
To the product page
iglidur® A181, sleeve bearing with flange, mm
  • The universal bearing for contact with food
  • Compliant with EC directive 10/2011 EC
  • FDA-compliant
  • Universal use
1.72 USD/Pc.
39 ready for shipping in 24 - 48 hours
To the product page
iglidur® A200, sleeve bearing with flange, mm
  • FDA-compliant, for low speeds
  • iglidur® A200 material complies with food and drug administration (FDA) regulations
  • For direct contact with food
  • For low speeds
1.06 USD/Pc.
77 ready for shipping in 3 - 4 working days
To the product page
iglidur® A500, sleeve bearing with flange, mm
  • The endurance runner at higher temperatures in the food sector
  • Compliant with EC directive 10/2011 EC
  • FDA-compliant
  • Temperature resistant from -100 °C to +250 °C
5.16 USD/Pc.
46 ready for shipping in 24 - 48 hours
To the product page
iglidur® A160, sleeve bearing with flange, mm
  • Compliant with FDA and EU regulations related to chemicals and food
  • Compliant with EC directive 10/2011 EC
  • FDA-compliant
  • High media resistance
1.72 USD/Pc.
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® A290, sleeve bearing with flange, mm
  • Robust, with high abrasion resistance
  • If low noise level is required
1.32 USD/Pc.
14 ready for shipping in 3 - 4 working days
To the product page
iglidur® UW160, sleeve bearing with flange, mm
  • KTW-compliant, suitable for contact with drinking water
  • Extremely wear-resistant in liquid at long-term operation
  • Suitable for contact with drinking water (KTW-compliant)
  • Good liquid media resistance
Upon request
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® T220, sleeve bearing with flange, mm
  • For the tobacco industry, FDA-compliant
  • Free from banned ingredients as requested by main manufacturers of tobacco products
  • The iglidur® T220 material complies with food and drug administration (FDA) regulations
  • Lubrication and maintenance-free
iglidur® Q, sleeve bearing with flange, mm
  • For high loads - wear-resistant on many shafts
  • Excellent wear resistance, especially for extreme loads
  • Recommended for extreme pv values
  • Good coefficients of friction
1.19 USD/Pc.
28 ready for shipping in 3 - 4 working days
To the product page
iglidur® Q2, sleeve bearing with flange, mm
  • The durable heavy duty bearing
  • Wear resistant and dimensionally stable at high loads
  • Good price/performance ratio
  • Lubrication and maintenance-free
1.72 USD/Pc.
52 ready for shipping in 24 - 48 hours
2 ready for shipping in 3 - 4 working days
To the product page
iglidur® F, sleeve bearing with flange, mm
  • Electrically conductive, highly pressure-resistant
  • Electrically conductive
  • High compressive strength
  • Good temperature resistance
1.95 USD/Pc.
35 ready for shipping in 3 - 4 working days
To the product page
iglidur® F2, sleeve bearing with flange, mm
  • ESD-compatible, wear-resistant and dissipative
  • Used to prevent electro-static charges
  • Also suitable for wet applications
  • Lubrication and maintenance-free
2.84 USD/Pc.
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® H4, sleeve bearing with flange, mm
  • The automotive standard for temperatures up to +200 °C
  • Low coefficients of friction
  • High wear resistance
  • High temperature resistance –40 °C to +200 °C
2.13 USD/Pc.
16 ready for shipping in 3 - 4 working days
To the product page
iglidur® UW, sleeve bearing with flange, mm
  • The underwater endurance runner, for fast rotation under water
  • For underwater applications
  • For fast and constant motion
  • Long service life
1.72 USD/Pc.
9 ready for shipping in 3 - 4 working days
To the product page
iglidur® N54, sleeve bearing with flange, mm
  • The biopolymer based on renewable resources
  • Based on renewable resources
  • Universal use
  • Lubrication and maintenance-free
0.91 USD/Pc.
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® G V0, sleeve bearing with flange, mm
  • V0 rating according to UL94, universal
  • UL94 V0 rating
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Abrasion resistant
  • Universal installation
Upon request
10 ready for shipping in 3 - 4 working days
To the product page
iglidur® J2, sleeve bearing with flange, mm
  • Environmentally friendly, versatile and cost-effective
  • Good mechanical properties, robust
  • Cost-effective
  • Good liquid media resistance
2.58 USD/Pc.
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® L500, sleeve bearing with flange, mm
  • Temperature-resistant and media-resistant
  • Continuous use up to +250°C
  • Up to 5 m/s rotating
  • Excellent wear resistance
Upon request
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® AB, sleeve bearing with flange
  • According to ISO 22 196:2011
  • Antibacterial
  • Universal use
  • Good liquid media resistance
Upon request
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® J4, sleeve bearing with flange, mm
Wear-resistant and low priced
  • Lubrication and maintenance-free
  • Cost-effective material for mass production
  • Low coefficients of friction
3.54 USD/Pc.
27 ready for shipping in 3 - 4 working days
To the product page
iglidur® L350, sleeve bearing with flange, mm
  • Extremely wear-resistant
  • up to 3.5 m/s rotating
  • Temperature resistant up to +210 °C on a permanent basis
  • Low level of moisture absorption
  • Good value for money
Upon request
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® RW370, sleeve bearing with flange, mm
  • Complies with fire protection standard DIN EN 45545  HL3, R22/R23
  • Flame retardant
  • High wear resistance
  • Low friction
  • Lubrication and maintenance-free
Upon request
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® HSD350, sleeve bearing with flange, mm
  • continuous use up to +180°C
  • High media resistance
  • Corrosion-free
  • For wet environments
Upon request
6 ready for shipping in 3 - 4 working days
To the product page
iglidur® Q290, sleeve bearing with flange, mm
  • For moderate to high loads, especially on soft shafts
  • Long life especially on soft shafts
  • Resistant to edge loads
  • Continuous use up to +140 °C