Split pillow block bearing for diameters up to 150 mm
Reduce assembly time by up to 50%
igubal® pillow block bearings
igubal® pillow block bearings are bearing units very easy to install and which are able to compensate alignment errors and prevent edge pressure.
The standard version consists of two parts made from iglidur® GLW, a material preferred in applications with static load, where only occasional movement takes place. Suitable for temperatures from -40 °C to +100 °C in long-term use. A four-part version is also available upon request. It includes an additional lining made from different iglidur® materials for various applications.
Easy to assemble and disassemble
Ideal for outdoor applications
Typical application areas
You will find plenty of additional application areas at our [Link id="9"]
When to use it?
If chemical resistance is required
If a cost-effective option is required
If you need dirt-resistant bearings
To adjust misalignments
When not to use it?
If temperatures are higher than +100 °C
If an integrated adjusting ring is required
If diameters above 150 mm are required
If rotation speeds higher than 0.5 m/s are required
Due to the fact that igubal® pillow block bearings are suitable for maintenance-free dry operation, they are worth considering in particular for applications where the installation site is difficult to access, in a humid or wet environment or when there are special hygiene demands. As a result, igubal® pillow block bearings are used for instance in wash-brush controls, in facade sunshade systems, in materials handling technology and in bakery equipment.
igubal® pillow block bearings are designed for mounting with two bolts. Exact alignment of the bearing housing is not necessary since the spherical bearing automatically compensates for alignment errors. Special adjusting rings can be used to fix the shaft.