My contact person
ASI Automatikk AS

Distributor

Sankt Hallvards vei 3, port 8

3414 Lierstranda

NORWAY

+47 9006 1100

Bar stock - iglidur®

Wear problems are solved quickly and cost-effectively with a large selection of bar stock products from igus®. They are long-lasting and their shape can be adapted individually. Plastic bar stock products made of iglidur® material do not need any additional lubrication and are maintenance-free. They have been specially developed for dynamic applications, have low coefficients of friction and are very hard-wearing. This substantially lengthens the service life of your application. iglidur® bar stock products are available as round rods, tubes or plates of different lengths. Upon request, they can be machined if special shapes are needed. Depending on the application, different iglidur® materials with specific properties can be selected. For example, there are iglidur® plastic bar stock products that withstand temperatures up to +250 °C or have been certified for food and drinking-water applications.

Categories
Filter
Requirements

Due to order peaks, the delivery time for single items is 10-15 working days longer than stated. Please refer to our order confirmation for the specific delivery date. For urgent, short-term requirements, please contact us personally so that we can realise the delivery time necessary for you. You will find your contact person at the top of the menu under "My contact person", next to the language/country selection, or on this page.

Number of products: 48

iglidur® A350, round bar

  • For use with temperatures up to +180°C
  • Comply with FDA requirements
  • For medium to high loads
  • Equally good for both rotating and pivoting applications
  • Lubrication-free and maintenance-free
  •  Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
     
41.06 USD/m
14 items, thereof ready for shipping:
1 ready for shipping in 24 - 48 hours
11 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J, round bar

  • Low wear against a lot of shaft materials
  • Low coefficients of friction during dry operation
  • Vibration dampening
  • Good resistance to chemicals
  • Best performance with soft shaft materials
  • Low moisture absorption
11.12 USD/m
16 items, thereof ready for shipping:
3 ready for shipping in 24 - 48 hours
3 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® X, round bar

  • Continuous operating temperatures from -100 to +250 °C
  • Extremely high chemical resistance
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • High compressive strength
99.42 USD/m
15 items, thereof ready for shipping:
12 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A180, round bar

  • Complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media resistance
  • For wet environments
  • High wear resistance
10.70 USD/m
12 items, thereof ready for shipping:
11 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A350, bar stock plates

  • For use with temperatures up to +180°C
  • Comply with FDA requirements
  • For medium to high loads
  • Equally good for both rotating and pivoting applications
  • Lubrication-free and maintenance-free
  •  Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
     
497.99 USD/Pc.
12 items, thereof ready for shipping:
12 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® H1, round bar

  • High wear resistance in extreme ambient conditions
  • Very low coefficients of friction
  • High resistance to temperature and chemicals
  • For underbonnet applications
  • Lubrication and maintenance-free
99.23 USD/m
7 items, thereof ready for shipping:
7 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J, hollow bar

  • Low wear against different shaft materials
  • Low coefficients of friction in dry operation
  • Vibration-dampening
  • Good resistance to chemicals
  • Best performance with soft shaft materials
  • Low humidity absorption
Upon request
3 items, thereof ready for shipping:
3 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® HSD350, plate strips

  • Sterilisable
  • For continuous use up to +180°C
  • High media resistance
  • Corrosion-free
  • For wet environments
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® J4, plate strip

  • Low-cost material for large volume production
  • For a low coefficient of friction
  • Good media resistance
  • Low moisture absorption
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm
Upon request
3 items, thereof ready for shipping:
2 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® HSD350, round bar

  • Sterilisable
  • For continuous use up to +180 °C
  • High media resistance
  • Corrosion-free
  • For wet environments
  • Lubrication and maintenance-free
252.96 USD/m
2 items, thereof ready for shipping:
1 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A500, round bar

  • Compliant with EC regulation 10/2011 EC, FDA-compliant
  • Temperature resistant from -100 °C to +250 °C
  • High chemical resistance
75.29 USD/m
13 items, thereof ready for shipping:
13 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® A180, bar stock plates

  • Complies with food and drug administration (FDA) regulations for repeated contact with food
  • Good media-resistance
  • For wet environments
  • High wear resistance
Upon request
6 items, thereof ready for shipping:
6 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® C500, plate strips

  • High chemical and temperature resistance
  • Resistant to water vapour
  • Good coefficient of friction and wear
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® Q2, round bar

  • Wear-resistant and dimensionally stable at high loads
  • Cost-effective
  • Lubrication and maintenance-free
132.83 USD/m
2 items, thereof ready for shipping:
2 ready for shipping in 48 - 72 hours
To the product page
RoHS compliant
According to 2011/65/EU (RoHS 2)

iglidur® E7, round bar

  • Low coefficient of friction
  • Self-lubricating due to incorporated solid lubricants
  • Corrosion-resistant
  • Choose the standard length of 1,000 mm or have a length cut to size from 100- 900 mm
Currently the part is not available. We will be happy to advise you on an alternative option.
RoHS compliant
According to 2011/65/EU (RoHS 2)
The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.