Modular gearbox system
drygear® Apiro gearbox with coupling
Apiro® worm gear with coupling for mounting shafts on the output drive.
Product information
- Available ratios: 4:1, 8:1, 32:1, 64:1
- Output torque: 2,5Nm
- Output: coupling for 8mm shafts
- Drive: pin/hand wheel
There is a large selection of accessories available within the Apiro® modular gearbox system.
Couplings for other shaft diameters up to max. 12mm are available on request.
drygear® Apiro gearbox for connecting drylin axes
Apiro® worm gear with coupling for connection to linear axes. Especially useful for synchronising multiple linear axes through one drive.
Product information
- Available transmissions: 4:1, 8:1, 32:1, 64:1
- Output torque: 2.5Nm
- Output: coupling for drylin® linear axes
- Drive: drive pin/hand wheel
In addition to the gearbox, an adapter plate is required for installing the gearbox on the linear axis.
drygear® Apiro | Connection to dryspin® lead screws
Apiro® worm gear with connection to dryspin® lead screws on the output side
Product information
- Available transmissions: 4:1, 8:1, 32:1, 64:1
- Output torque: 2.5Nm
- Output: lead screw nut
- Drive: drive pin/hand wheel
The Apiro® modular gearbox system includes a wide selection of optional accessories.
You can find suitable lead screws here.drygear® Apiro gearbox with rotary disc
Product information
- Available transmissions: 4:1, 8:1, 32:1, 64:1
- Output torque: 2.5Nm
- Output: rotary disc
- Drive: drive pin/hand wheel
The Apiro® modular gearbox system includes a wide selection of optional accessories.
drygear® Apiro | Gearbox with double-sided rotary disc
Product information
- Available transmissions: 4:1, 8:1, 32:1, 64:1
- Output torque: 2.5Nm
- Output: double-sided rotary disc
- Drive: drive pin/hand wheel
- INI kit available
The Apiro® modular gearbox system includes a wide selection of optional accessories.
drygear® Apiro gearbox with drive pin
Apiro® worm gear standard version for flexibly connecting drives.
Product information
- Available transmissions: 4:1, 8:1, 32:1, 64:1
- Output torque: 2.5Nm
- Output: hollow shaft
- Drive: drive pin/hand wheel
The Apiro® modular gearbox system includes a wide selection of optional accessories.
drygear® Apiro gearbox with manual clamp, position indicator and hand wheel
Product information
- Available transmissions: 4:1, 8:1, 32:1, 64:1
- Output torque: 2.5Nm
- Output: coupling for 8mm shaft diameter
- Drive: manual clamp, position indicator and hand wheel
The Apiro® modular gearbox system includes a wide selection of optional accessories.
Couplings for other shaft diameters (up to 12mm) are available upon request.
drygear® Apiro | Modular Gearbox
General Properties:
- Dry operation thanks to tribologically optimised polymers
- max. dynamic load of 250N
- max. speed of 5mm/sec.
- Stroke per rotation: 0.5mm/rotation
- Stroke: 100mm
- Stroke configurable from 10-250mm on request
drygear® Apiro gearbox with manual clamp and position indicator
Apiro® worm gear with manual clamp and position indicator for manual adjustment and mounting.
Product information
- Available transmissions: 4:1, 8:1, 32:1, 64:1
- Output torque: 2.5Nm
- Output: hollow shaft for Apiro multifunctional profile
- Drive: hand wheel
- Accessories can be pivoted in four positions: 0°, 90°, 180°, 270°
Optionally available
- More transmission ratios
iglidur® Gears
The gears made of tribologically optimised iglidur® high-performance polymers impress with their significantly higher service life than gears made of comparable plastics.
Due to fine-tuned additives of reinforcement materials and solid lubricants, they do not require additional lubrication.
In the industry's largest test laboratory, the gears made of iglidur® materials are thoroughly tested to continuously improve their service life.
