My contact person
ASI Automatikk AS

Distributor

Sankt Hallvards vei 3, port 8

3414 Lierstranda

NORWAY

+49 9006 1100

Electric motors

Cost-effective and scalable motors for linear axes, linear robots and delta robots
The portfolio of igus® includes stepper motors in several sizes, extendable with encoders and brakes, cost-effective and quiet DC motors, which can also be operated via battery without complex external power electronics, and EC motors for fast, powerful movements. Gearboxes that reduce the output speed and thus increase the available drive torque.
The motors are used, among other things, in packaging and inspection technology, for example in sensor and camera travel - also in the food sector, outdoors and areas exposed to splashes and water spray.
 

Products

Filter

Size
Electrical information
Fitting
System
Design

Number of products: 35

drylin® E stepper motor with connector, NEMA 11
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.12Nm
  • Nominal current: 1.00A
  • Motor connection: metric connector
drylin® E lead screw stepper motor with strands and encoder, NEMA 23, short type
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP40 
  • Holding torque: 1.00Nm
  • Nominal current: 2.80A
  • Motor connection: strands and encoder, JST connector
drylin® E stepper motor with stranded wire, NEMA 23
  • Installation size: NEMA23/flange installation size 56 mm
  • Protection class motor housing: IP65 (shaft seal IP52), motor with stranded wires IP40
  • Holding torque: 2.00 Nm
  • Nominal current: 4.20 A
  • Motor connection: strands and encoder, JST connector

from 111.00 USD/Pc.

To the product page
drylin® E stepper motor with connector and encoder, NEMA 23
  • Installation size: NEMA23/flange installation size 56 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 2.00 Nm
  • Nominal current: 4.20 A
  • Motor connection: Metric connector

from 425.00 USD/Pc.

To the product page
drylin® E special stepper motor with terminal box, water protection, NEMA 23
  • Installation size: NEMA23/flange installation size 56 mm
  • Protection class motor housing: IP68 (10 m)
  • Holding torque: 1.30 Nm
  • Nominal current: 4.20 A
  • Motor connection: terminal box
drylin® E stepper motor with stranded wire, NEMA 23XL
  • Installation size: NEMA23XL/flange dimension 60 mm
  • Protection class motor housing: IP65 (shaft seal IP52), motor with stranded wires IP40
  • Holding torque: 3.50 Nm
  • Nominal current: 4.20 A
  • Moto connection: Strand with JST connector

from 154.58 USD/Pc.

To the product page
drylin® E lead screw stepper motor with strands, NEMA 23
  • Installation size: NEMA23/flange installation size 56 mm
  • Protection class motor housing: IP40 
  • Holding torque: 2.00 Nm
  • Nominal current: 4.20 A
  • Moto connection: Strand with JST connector

from 220.58 USD/Pc.

To the product page
drylin® E lead screw stepper motor with strands and encoder, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.50Nm
  • Nominal current: 1.80A
  • Motor connection: strands and encoder, JST connector

from 265.93 USD/Pc.

To the product page
drylin® E lead screw stepper motor with strands and encoder, NEMA 11, short type
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.06 Nm
  • Nominal current: 0.67 A
  • Motor connection: strands and encoder, JST connector
drylin® E lead screw stepper motor with strands, NEMA 11, short type
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.06 Nm
  • Nominal current: 0.67 A
  • Motor connection: strands with JST connector
drylin® E lead screw stepper motor with strands and encoder, NEMA 17, short type
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.20Nm
  • Nominal current: 1.40A
  • Motor connection: strands and encoder, JST connector
drylin® E lead screw stepper motor with strands, NEMA 17, short type
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.20Nm
  • Nominal current: 1.40A
  • Motor connection: strand with JST connector
drylin® E stepper motor with connector, NEMA 17
  • Installation size: NEMA17/flange installation size 42 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.50 Nm
  • Nominal current: 1.80 A
  • Motor connection: Metric connector

from 198.00 USD/Pc.

To the product page
drylin® E stepper motor with stranded wire, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP65 (shaft seal IP52), motor with stranded wires IP40
  • Holding torque: 0.5Nm
  • Nominal current: 1.80A
  • Motor connection: Stranded wire

from 75.00 USD/Pc.

To the product page
drylin® E stepper motor with connector and encoder, NEMA 17
  • Installation size: NEMA17/flange installation size 42 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.50 Nm
  • Nominal current: 1.80 A
  • Motor connection: Metric connector

from 336.00 USD/Pc.

To the product page