igusigus-icon-cart(0)

Motor control

The igus® D1 and D2 motor control system can be used for any type of motor. With the exception of the igus® D3 motor control system, all can be operated at 48V. The igus® D3 motor control system works with 24V. The motor control systems D3, D7, D8 and D9 are intended for simple automation directly on the control system and therefore do not require any software and/or PC. The igus® D1 and D2 motor control system also do not require any additional software installation, but are programmed based on web browsers. In this way, settings can be parametrised on the PC but also on the tablet and smart phone. No programming knowledge is required for this. All output stages can also work as slaves, making them versatile.

Number of products 7

drylin® D7 stepper motor output stage (NEMA11/17) with cycle/direction

drylin® D7 stepper motor output stage (NEMA11/17) with cycle/direction
  • Can control stepper motors with up to 2.7A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
EGP 2,085.34/Pc.Cost-effective price break available onlineEGP 1,836.91/Pc. 10 Pc.

4 variant(s), of which:

igus-icon-lieferzeit-dot
4 ready for shipping in 24 - 48 hours

drylin® D8 stepper motor output stage (NEMA23/24) with cycle/direction

drylin® D8 stepper motor output stage (NEMA23/24) with cycle/direction
  • Can control stepper motors with up to 4 A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
EGP 2,558.83/Pc.Cost-effective price break available onlineEGP 2,254.25/Pc. 10 Pc.

1 variant(s), of which:

igus-icon-lieferzeit-dot
1 ready for shipping in 24 - 48 hours

drylin® D9 stepper motor output stage (NEMA34) with cycle/direction

drylin® D9 stepper motor output stage (NEMA34) with cycle/direction
  • Can control stepper motors with up to 7 A continuous current at supply voltage up to 48 V
  • Ready for immediate use
  • Simple control
  • Accurate positioning
EGP 2,804.48/Pc.Cost-effective price break available onlineEGP 2,470.59/Pc. 10 Pc.

1 variant(s), of which:

igus-icon-lieferzeit-dot
1 ready for shipping in 24 - 48 hours

drylin® D3 for direct current motors

drylin® D3 for direct current motors
  • Simple automation directly using the control system without software and/or PC
  • Operation with limit switch or via power consumption
  • Left/right operation and speed control directly on the housing
  • Option for external switches/joysticks
  • Various modes of operation, such as tip operation and start to finish (semi-automatic)
  • Various adjustable acceleration ramps
  • Power supply via 24V/2.5A
     
    All relevant documents for dryve D3 can be found in the downloads.
EGP 3,951.36/Pc.Cost-effective price break available onlineEGP 3,556.22/Pc. 10 Pc.

1 variant(s), of which:

igus-icon-lieferzeit-dot
1 ready for shipping in 24 - 48 hours

drylin® D2 motor control system for stepper, DC and EC/BLDC motors

drylin® D2 motor control system for stepper, DC and EC/BLDC motors
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff
     
    You can find all relevant documents in the downloads below.
     

    Further information on dryve D1 info page
EGP 10,690.40/Pc.Cost-effective price break available onlineEGP 9,418.40/Pc. 10 Pc.

1 variant(s), of which:

igus-icon-lieferzeit
1 Delivery time on request

drylin® D1 motor control system for stepper, DC and EC/BLDC motors

drylin® D1 motor control system for stepper, DC and EC/BLDC motors
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff
     
    You can find all relevant documents in the downloads below.
     

    TEST BEFORE INVEST - Try out the motor control system here with the online simulation before you buy it
EGP 11,137.90/Pc.Cost-effective price break available onlineEGP 9,812.54/Pc. 10 Pc.

1 variant(s), of which:

igus-icon-lieferzeit
1 Delivery time on request

drylin® D3-LM motor control system for DC motors with loop mode

drylin® D3-LM motor control system for DC motors with loop mode
  • Same dimensions as the standard D3
  • Extended functions for "Micro Automation"
  • Individually pre-programmed pendulum movements
  • Individually pre-programmed pause times between movements
     
    All relevant documents for D3 dryve:
    Go to download portal

Shopping at igus®