igus® Academy - The archive for all drylin® webinars

In just a few steps, you can configure a customised linear guide for your application with the drylin® linear guide expert and calculate the service life at the same time. You can then simply order the configuration online or request further information.

In this online seminar, we will introduce you to our D1 motor controller for stepper (ST), DC and EC/BLDC motors! Traverse paths, positions, speeds and running times can be easily defined with the stepper motor D1 dryve via a web interface-based control system. Our experts Markus Ziermann and Sebastian Probst will show you practical tips and tricks for the intuitive operation of the D1 dryve motor control system.
 
Contents:

• The advantages of the SHT stainless steel linear modules
• The available sizes of the SHT stainless steel linear modules
• Configure a complete linear module online in just a few steps

Watch on Youtube: D1 dryve Motor control commissioning and operation: igus® online seminar (Link) 

With the stainless steel linear modules from the drylin® SHT series, you can make your format adjustment system resistant to heavy soiling, heat, high humidity or aggressive chemicals.
Our drive technology experts Darius Jansa and Sebastian Wiederhold will show you the advantages of combining stainless steel and high-performance plastics in a 30-minute online seminar. You will also be welcomed by our industry expert Bastian Mehr.
 
Content:

• The advantages of SHT stainless steel linear modules
• The sizes of SHT stainless steel linear modules on offer
• Configure a complete linear module online in just a few steps

Watch on Youtube: Stainless steel linear modules (Link) 

Familiarisation with robot programming should not take too much time. That is why we would like to introduce you to the igus® Robot Control. Learn in theory and practice how to get started with automation without high programming and cost expenditure.

Contents:
Commissioning, referencing, programming and integration of digital I/Os using the example of an igus® gantry robot.

Achievements:

You will be able to independently programme and control robots with different kinematics. For more security, you can test the software free of charge.

Watch on Youtube: online seminar: Programming and controlling robots with the igus® Robot Control (Link) 

Our online tool expert Darius Jansa will guide you through the shaft configurator together with our linear technology expert Michael Hornung. With the help of the configurator, you can design and configure your linear shafts in just a few steps - online.

Contents:
Joint application with detailed explanations and helpful tips and tricks relating to the shaft configurator.

Successes:
You will

• be able to configure finished linear shafts independently and without registration in just a few steps, including production drawing and CAD model.
• receive a 100% correct dimensioned drawing and a step model free of charge.
• receive an immediate price calculation and delivery time display, order online immediately or request a quote.

Watch on Youtube: Webinar: Configure a round wave in just 30 seconds (Link) 

Our online tool expert Darius Jansa will guide you through the SHTconfigurator together with our drive technology expert Sebstian Wiederhold. With the help of the SHTconfigurator, you can design and configure your spindle-linear axis in just a few steps - online.

Contents:
Joint application with detailed explanations and helpful tips and tricks relating to the SHTconfigurator.

Achievements:
You will

• be able to configure finished spindle-linear axes independently and without registration in just a few steps, including production drawing and CAD model.
• receive a 100% correct dimensioned drawing and a step model free of charge.
• receive an immediate price calculation and delivery time display, order online immediately or request a quote.

Watch on Youtube: spindle-linear axis online designing (Link) 

From the idea to the finished spindle in 5 minutes

Our experts Darius Jansa and Stefan Schulze Pröbsting will guide you through the spindle configurator. The course is for anyone who needs or wants to design a spindle with corresponding CNC machining. Whether you are a businessman, technical draughtsman or engineer, you will learn how to achieve your goal quickly, even without CAD knowledge.

• Contents: Joint application with detailed explanations, helpful tips and tricks
• Successes: You can configure a spindle including CAD model independently, order online immediately and then simply calculate the service life. The immediate price calculation and display of delivery times take place in real time during configuration.

Watch on YouTube: online seminar "From the idea to the finished spindle in 5 minutes" (link)