New drylin drive technology products

Stay up to date. On this page you will find our latest products in the world of linear axes. You can look forward to the latest products and further developments according to customer requirements. Every year we launch new products on the market so that you can find exactly the right product for your application. At the same time, our products are becoming ever smarter and more user and environmentally friendly.

Autumn news 2026

drylin ZLX toothed belt axis with carriage for linear motion.

ZLX toothed belt axis anti-reflect

Black anodised anti-reflect design
Less reflection, more design freedom
Robust high-profile design
Simple assembly options

More about the ZLX-AR

drylin SLR linear axis as a linear module with black carriage and screw drive.

SLR lead screw axis anti-reflect

Black anodised anti-reflect design
High stiffness with lightweight
More design freedom
High load capacity

More about the SLR-AR

drylin ZLN toothed belt axis as a linear axis with a long carriage and drive unit.

ZLN toothed belt axis anti-reflect

Black anodised anti-reflect design
New zinc die-casting carriage: function integration of three components in one
Including electric motor

More about the ZLN-AR

drylin NTM telescopic, linear axis with an extendable carriage.

NTM-45 electric telescope, reduced clearance

Robust telescopic extension with electric motor
New: Reduced clearance
Ready to install and ready to connect
PFAS-tested and PTFE-free coating (iglidur IC-05PF)

NTM-45 in the online shop

Our news highlight 2026

drylin SLW-1040-10X25-E7-AL linear module for dry cleanrooms

With the SLW-1040-10X25-E7-AL linear axis, igus presents a solution that has been consistently developed for use in dry cleanrooms. The axis was measured by Fraunhofer IPA, the leading test institute for cleanroom technology, in an ISO3 test environment and achieved the best possible result of ISO Class 4 in accordance with ISO 14644-1 – and that with a dryspin DS10x25 high helix thread with a feed speed of up to 40mm/s. This makes it suitable for highly sensitive production and testing processes where low particle levels and process stability are essential.

Cleanroom linear axis in the online shop

igus SLW-1040 linear axis for HMI, with Fraunhofer IPA dry-cleanroom test.

Cleanroom linear axis in the online shop

Spring news 2026

Two linear axes for HMI with ESD marking.

ZLW-ES-EX linear axes with ESD protection

Reliable protection against electrostatic discharge
Certified by the ESD Academy in accordance with IEC 61340-5-1:2024
Available in two installation sizes: For narrow installation spaces (50mm) or wide support (120mm)
Made of stainless steel, with iglidur X bearing liners

ZLW-ES-EX in the online shop

HMI component with a linear drive and symbols for operation and signal transmission.

drylin SLX-Protect linear actuator with lead screw

Maximum reliability thanks to fully integrated metal cover
Easy assembly thanks to many grooves (groove 10 type B) and fastening options
For manual adjustment and electrical operation

SLX-8060-PT in the online shop

drylin ZLX-Protect linear actuator with toothed belt

Maximum reliability thanks to fully integrated metal cover
Easy assembly thanks to many grooves (groove 10 type B) and fastening options
For manual adjustment and electrical operation

ZLX-8060-PT in the online shop

HMI component with linear guide and adjustment handwheel.

SLW-0620-FL-ESX linear module for extreme temperatures

Made of stainless steel
With iglidur X plain bearings for extreme temperatures from –100°C to +250°C
Flexible pitches from 1 to 25.4mm/rev

SLW-0620-FL-ESX in the online shop

HMI linear actuator with PFAS tested and PTFE free symbols.

NTM-45 electric telescope, PTFE-free and PFAS-tested

Robust telescopic extension with electric motor
Infinitely variable extension length up to 500mm
Coating: iglidur IC-05PF (PFAS-tested)
Motor orientation: 0°

NTM-45 in the online shop

GRR-30 Z-axis for large gantry and cantilever applications

Lightweight, rigid Z-axis
For long stroke up to 1,500mm
Load capacity up to 25kg
Lubrication-free and low-maintenance

GRR-30 in the online shop

New white paper: Risks and solutions for reliable drive technology in extreme temperatures

Extreme low temperatures and temperature fluctuations can prevail in many industries. These change physical parameters, lead to thermal contraction and can cause condensation - with direct effects on materials, motors, control systems and linear axes. Our white paper highlights the specific specifications and challenges of plastics, electric motors, control systems and linear axes at temperatures down to -40°C and presents solutions to ensure the safety of systems in deep-freeze applications through targeted material adaptations and system designs.

Download white paper

Whitepaper mock-up on sub-zero temperature solutions for drive technology with open chart pages.

Download white paper

All new products from spring 2026:

To the news overview

igus motion plastics news 2026 with product components and machine parts in a banner.

Autumn news 2025

SLW-06-70-FLS linear unit in black and white with two carriages and a lead screw drive.

SLW-0670-FLS flat, wide lead screw axis

Suitable for manual adjustment as well as electrical operation
Large support spacing (79mm) for increased stiffness
Extremely flat type (20mm)
Silver or black anodised

SLW-0670 in the online shop

drylin SLW miniature linear module with lead screw and guide rods.

SLW-0620-Ds08 miniature axis

Based on drylin W double rails WS-0620
With dryspin high helix thread Ds Ø08
Up to 40% more stroke thanks to new lead screw
With two-part carriage for more zero clearance
Stroke length up to 300mm

SLW-0620-Ds08 in the online shop

drylin SLW miniature linear module with lead screw and guide rails.

SLW-0620-BB-ES stainless steel miniature axis

Suitable for manual adjustment as well as electrical operation
Made of stainless steel, suitable for hygiene-critical areas
With FDA/EU-compliant plain bearings
Flexible pitches from 1 to 25.4mm/rev

SLW-0620-BB-ES in the online shop

SLW-ESAX500-1040-FDA linear actuator with stainless-steel housing and ball screws.

SLW-ESAX500 FDA linear module

Stainless steel version for ESD and food applications
Bearing components made of iglidur AX500
Electrically conductive and FDA-compliant

SLW-ESAX500 in the online shop

SLR linear module with spindle drive and multiple guide blocks.

SLR-60-32x32 strong linear module

With new dryspin high helix thread size Ds32x32 for extremely high feed speeds
With axial load capacity of up to 6,250N and radial load capacity of up to 25,000N

Further information on the SLR-60

Don't miss any more igus news

With our newsletter you will no longer miss any news from igus. Stay up to date at all times regarding our company and our motion plastics. Be the first to discover new products, exciting applications, current laboratory reports and much more.

Go to igus newsletter registration

Go to igus newsletter registration

Spring news 2025

SLX linear axis with open carriage and cutaway view of the drive.

SLX linear module with many connection options

Suitable for manual adjustment as well as electrical operation
Easy assembly thanks to many grooves (groove 10 type B) and fastening options
Stroke length up to 1000mm
100% lubrication-free and tested

SLX in the online shop

ZLW-1050-ES-EX linear system with electrical voltage warning symbol.

ZLW-1050-ES-EX conductive toothed belt axis

Suitable for applications that require a conductive toothed belt axis (e.g. powder coating, painting systems, flour production or measurement technology)
Stroke length up to 2,000mm
100% lubrication-free and tested

ZLW-1050-ES-EX in the online shop

Three SLR-30 linear axes in different lengths for precise linear motion.

SLR-30 heavy duty linear module for high loads

Extension in installation size 30
With single carriage, multi-carriage or assembly carriage
Simple alignment via dowel pins, without additional clamps
Wide range of connection options

SLR-30 in the online shop

Spindle lifting table with two linear axes for a cross-slide unit.

SLW-XY-10120 wide XY table

Two travel directions combined in one module for a working area of 500 x 500mm
Robust, wide load-bearing surface
Stroke length max. 500mm

SLW-XY-10120 in the online shop

SLW-XY-BB-0620 spindle drive with two views and an internal detail.

SLW-XY-BB-0620 clearance-free miniature XY table

Two travel directions in one module
For small installation spaces
Silver or black anodised
Stroke lengths max. 100mm

SLW-XY-BB-0620 in the online shop

SLW-BB-0620-FLZ-RL linear axis with threaded spindle and thread detail.

SLW-BB-0620 with left-hand/right-hand thread

Two carriages move synchronously in a linear module, on a central stroke, towards or away from each other with one turn
Stroke length up to 200mm

SLW-BB-0620 in the online shop

Stainless steel linear module with lead screw axis and guides for food applications.

drylin linear module SHT according to hygienic design

Optimised carriage design and better rinsability with connection of axis.
High-quality, highly resistant stainless steel
Smooth operation with dryspin high helix thread
Components meet FDA and EU Regulation 10/2011

SHT-HYD lead screw axis in the online shop

Live in your company

The drive technology roadshow is coming to your company!

Would you like to get started with automation, optimise existing drive systems or get to know our products? Then book our drive technology roadshow now. Our bus is packed with numerous drive technology parts and has its own power supply. From linear axes and motors to motor control systems and accessories, we will bring a wide selection of products that you can experience live and test for yourself. Enquire about your preferred date now and let the drive technology roadshow come to your company.

Further information and booking