3D printing wiki

FDM printing: Layer by layer to the finished component

In FDM printing, plastic filament is heated and applied layer by layer. Small parts can be produced quickly and cost-effectively. Read more about how the process works, advantages and limitations, processing tips and practical examples from industry.

Use of Bambu Lab printers in the company network

In company networks, PCs and 3D printers are often located in different subnets so that the printer cannot be found in the slicing software. igus Bambu Wingman offers a solution to this problem: the software allows for reliable communication between Bambu Lab printers and the slicing software without them communicating with external servers and sharing print data with third parties.

All functions are available locally and can be used directly from Bambu Studio or OrcaSlicer, regardless of firmware or software versions.

Food-safe 3D printing with filament

Not all materials are suitable for contact with food. So what requirements apply to components in contact with food and how can they be implemented? Find out more about standards and norms such as FDA and EU 10/2011, material selection and practical tips for processing filaments that are food-safe.

Design special lead screw nuts for 3D printing

The production of complex special nuts often involves a great deal of manual effort, which can quickly make such solutions very expensive. In this case, 3D printing technologies help reduce costs - but they also require a 3D model of the desired thread. You can find out how to create CAD models for special nuts in this article.

Design tips: multi-material components from the 3D printer

When using filaments for 3D printing, components can be produced from two or more materials. There are a few things to consider when designing such components digitally with CAD programs. For example, how do you ensure that the different materials overlap smoothly in the same component? You can find answers to this and other questions in this article.

How do I replace my defective gear?

Machine downtime due to a defective gear in the gearbox is extremely inconvenient. The gear should be replaced immediately. In such a case, the 3D printing service from igus offers a fast and reliable replacement option. How do you get a new, wear-resistant gear from 3D printing step by step and without CAD knowledge?

How do I use the igus bonding agent for tribofilaments?

Especially with demanding filaments, it can happen that the component does not adhere properly to the print bed. As a result, the corners of the component can separate from the print bed, leading to undesirable deformations. In the worst case, the component can even become completely detached from the print bed. Solve this problem now with the igus® bonding agent!