Change Language :
Product range expansion to include dryspin® floating bearing plastic lead screw support blocks
Latest design study
This study combines stiffened plastic blocks with a metallic clamping ring and iglidur® plain bearings for the fixed bearing version and only the plastic blocks with an iglidur® special slider for the floating bearing version. They are 1:1 identical to metallic bearing blocks. They are also up to 60 % cheaper and 80 % lighter compared to the standard metal bearing blocks. The new floating bearing plastic bearing blocks are presented in 4 dimensions.
► SLSP-S6-LL
► SLSP-S8-LL
► SLSP-S10-LL
► SLSP-S12-LL
Tech up
- New lead screw support block design in four new sizes for easy lead screw drive support
- The same dimensions as commercially available lead screw support blocks, allowing 1:1 replacement
- Up to 80% lighter than commercially available metallic lead screw support blocks with the same mounting dimensions
- Easy installation
Cost down
- Cost-effective design optimised for injection moulding
- Costs up to 60% less than commercially available metallic lead screw support blocks with the same mounting dimensions
- No maintenance necessary
- Variable design for all threads in installation sizes Ø6mm-12mm thanks to threadless clamping rings
Proof
- This study was developed in response to customer requests according to our motto: cost-effective, lightweight, and lubrication-free
- Do you have suggestions and ideas for this study? Would you like to test them? Feel free to contact us.
Sustainability
- Lubrication-free operation
- Ideal for lightweight construction
- igus® has been an investor in Mura Technology from the very beginning, and is advancing chemical recycling. From plastic waste to crude oil in 20 minutes: igus® hydroprs
product range
Highest positioning accuracy
| Part No. | A [mm] | H [mm] | h1 [mm] | lt [mm] | ts [mm] | d1 [mm] | E1 [mm] | Weight [g] |
|---|---|---|---|---|---|---|---|---|
| SLSP-S6-LL | 42 | 26 | 13 | 20 | 5.5 | 6 | 30 | 14 |
| SLSP-S8-LL | 52 | 34 | 17 | 23 | 6.6 | 8 | 38 | 29 |
| SLSP-S10-LL | 70 | 50 | 25 | 24 | 9.0 | 10 | 52 | 64 |
| SLSP-S12-LL | 70 | 50 | 25 | 24 | 9.0 | 12 | 52 | 71 |
The new sizes of the dryspin® floating bearing plastic spindle bearing blocks at a glance
Further important information:
Higher efficiency, longer service life
What the dryspin® technology can do
The dryspin® steep thread technology was developed in-house by igus® in 2013 and offers numerous advantages over conventional steep threads. Due to the flat flank angle, they efficiently convert the applied force into a translational movement. With the specifications and geometries matched to the plastic nut and spindle, dryspin® offers even higher service life and efficiency for steep threads. Thanks to the rounded tooth flank geometry, the contact surface between the threaded spindle and lead screw nut is reduced and the threaded systems run almost silently and vibration-free under load.
The larger distances between the individual dryspin® threads increase the proportion (factor 1.3) of tribologically optimised polymer in the threads. More wear-resistant material and a higher degree of efficiency are decisive for a service life that is up to 5 times longer than that of conventional steep threads.
Try out dryspin® technology for yourself
With the help of the free thread sample
It is important to hold a real sample in your hands to get a comprehensive impression. We will be happy to send you a sample of our dryspin® lead screws.
We have summarised all the specifications and advantages of dryspin® lead screw technology on the sample for you. See for yourself and if you have any questions, our experts will be happy to help you.
ASI Automatikk AS Distributor+47 9006 1100